2,193 jobs found
Browse Jobs
Bricklayer2-3 weeksGateshead, Newcastle Upon Tyne£25 p/hour Monday 22nd June StartZeal recruitment are looking for a Bricklayer for 2-3 weeks in Gatehead, Newcastle Upon TyneThis will be working on a warehouse, building an internal office. This will start Monday 22nd June StartThe Bricklayer duties will be: • Block work, building internal officeThe Bricklayer will need to have:• Proven experience working on block work• A minimum of 2 references and any photos of works &ndash ...
Role: BricklayerLocation:Southport/LiverpoolContract type: Temporary (Full time)Start date:29/06/2026Duration: ongoingPay rate: negotiable depending on experienceWorking hours:TBCFawkes & Reece contact: Ollie (Bolton office) - (url removed) Requirements: *Previous experience as a Bricklayer *CSCS Card *NVQ Level 2 *Own tools and Transport What to do next: If you think you would be a good candidate for this role or would like to find out more about the position, please reach out to Ollie in o ...
BricklayerSwadlincoteTemporary - 4 MonthsHourly rate -£24.00 - £26.00 per hourSellick Partnership Ltd are assisting a client working within the private sector with the recruitment of a Bricklayer to join their team on a temporary basis.Duties of the Bricklayer role will include, but is not limited to: Set out and lay bricks, concrete blocks, and other masonry units accurately from foundation level to block-and-beam floor level.Construct cavity walls, solid walls, and substructure mas ...
Sapien Engineering are looking for multiple build technicians to join a rapidly expanding automotive client on a contract basis. The client is based near Clapham, Greater London.These are 6-month contracts, inside IR35 paying £200 a day.Requirements: * Mechanical + Electrical Knowledge * Assembly & Fabrication * Testing & Debugging * Basic Machining, Fabrication or Welding Experience * Software Competency, Engineering Drawing Interpretation * Previous Experience in Automotive * EV ...
CSCS Cleaners required for a short term contract!!!!!!A 1 week cleaning project on a live site in Lutterworth (LE17)We are seeking 2 experienced cleaners with CSCS cards to assist in a Builders clean of a newly refurbished warehouse in Lutterworth.Work is due to commence Monday 6th July and is expected to run all week.8-4pm shifts£14ph paid a week in arrears.What you will need:CSCS card PPE (Safety boots & Hi Vis vest) some experience on site, ideally cleaningIf you fit the criteria ap ...
Bus ShunterJob Type: ContractStart Date: ImmediateLocation: GlasgowSalary: £13.65 - £15p/h Daniel Owen Agency are currently looking for Bus Shunters based in Glasgow. Ideal Candidates must have previous experience driving large vehicles. Key Responsibilities:Monitoring Run-in Area: Oversee the route from entrance to the fuel bay, ensuring efficient operations.Defect Reporting: Report defects in busses and complete lists provided at the start of each shift.Bus Interior Maintenance: Cl ...
Bus ShunterJob Type: ContractStart Date: ImmediateLocation: GlasgowSalary: £15 - £16.90p/h Daniel Owen Agency are currently looking for Bus Shunters based in Glasgow. Ideal Candidates must have previous experience driving large vehicles. Key Responsibilities:Monitoring Run-in Area: Oversee the route from entrance to the fuel bay, ensuring efficient operations.Defect Reporting: Report defects in busses and complete lists provided at the start of each shift.Bus Interior Maintenance: Cl ...
Cabinet Member Executive SupportWestminsterContract£18.30 per hourOur client is looking for an experienced Cabinet Member Executive SupportProactively manage multiple Cabinet Members’ diaries to enable the smooth and effective running of their officesOrganise the logistical and administrative aspects of complex, cross-council meetingsEnsure Cabinet Members are fully briefed for every meeting by commissioning briefing notes in a clear and timely mannerEnsure relevant officers are invi ...
Business Support Investigator - Witney - Oxfordshire - On sitePeopleforce Recruitment are delighted to be supporting the search of one of our long-standing pharmaceutical / healthcare partners. We are searching for a business support investigator to monitor customer complaints to identify patterns, investigate potential issues, and raise concerns when product or process problems may exist.Key Responsibilities * Review complaint data to identify trends and recurring issues. * Investigate trends u ...
Business Support OfficerLocation: Bournemouth, UK (Hybrid - with a requirement to attend the office one day per week and flexibility to work across sites when required.)Start Date: ASAP / June 2026Contract Length: Until January 2027Payrate: £14.82 per hr. via PAYE/ £19.09 per hr. via UmbrellaJob Purpose :We are seeking an experienced and highly organised Business Support Officer to provide accurate and efficient administrative support across Transport and Engineering services. The ro ...
Buyer ILocation: Loughborough (Onsite)Position Type: Full-Time, 6-Month Contract - potential for extensionHours: 36.25 hours per week (Mon-Thu: 09:00-17:00, Fri: 09:00-16:00)Pay Rate: £14-15 per hour (Equivalent to £29,000/annum)About the RoleWe are seeking a detail-oriented and analytical Buyer I to join our procurement team in Loughborough. In this role, you will manage a diverse portfolio of products and suppliers across Europe. Your primary focus will be to optimize inventory lev ...
Buyer ILocation: Loughborough (Onsite)Position Type: Full-Time, 6-Month Contract - potential for extensionHours: 36.25 hours per week (Mon-Thu: 09:00-17:00, Fri: 09:00-16:00)Pay Rate: £14-15 per hour (Equivalent to £29,000/annum)About the RoleWe are seeking a detail-oriented and analytical Buyer I to join our procurement team in Loughborough. In this role, you will manage a diverse portfolio of products and suppliers across Europe. Your primary focus will be to optimize inventory lev ...
Location: Liverpool L37Rate: £17.00Start: ASAPCareermakers Recruitment are seeking experienced CCDO Operative for a position in the Liverpool L37 area.About us:At Careermakers, we link CCDO Operative with top job opportunities. Discover your next role with us.Duties: * CCDO Operative * soft strip outBenefits: * Parking near site * Full time work * Working in a team * Local public transport linksQualities we seek: * Hard working * Punctual * Attention to detail * Motivation * DedicationRequ ...
Location: Liverpool L3Rate: £17.00Start: ASAPCareermakers Recruitment are seeking experienced CCDO Operative for a position in the Liverpool L3 area.About us:At Careermakers, we link CCDO Operative with top job opportunities. Discover your next role with us.Duties: * CCDO Operative * soft strip outBenefits: * Parking near site * Full time work * Working in a team * Local public transport linksQualities we seek: * Hard working * Punctual * Attention to detail * Motivation * DedicationRequir ...
Search Consultancy are looking for an experienced CCDO Green carded or CSCS Green General Operative for an immediate start in Liverpool.Enabling worksEducational project Demolition 9 hour per day Free parkingDuties will include breaking out concrete plinths with breakers, cold-cutting redundant water-tanks with grinders/cutters etc, other power tool aspects, lading out waste materials, assisting other trades, and all associated tasks as required.Candidates will require:A valid CCDO Green card OR ...
MJP are currently looking for experienced CCDO Labourer's to join a well-established contractor.You’ll be responsible for keeping site tidy, moving materials, assisting trades when required and working to helath and safety standards.Key Responsibilities: * Strip Out * Removing Materials * Assisting with DeliveriesRequirements: * Valid CCDO card (essential) * Ability to work independently or as part of a team.For more information, please contact Haroun on ZERO, SEVEN, SEVEN, FOUR, TWO, ...
Search Consultancy are looking for 5x CCDO Green Operatives for an immediate start in Liverpool.Arts and culture projectSensitive 'live' site 9-10 hours per dayFaceFit and mask not requiredBest reached by public transport / on footDuties will include'Soft Strip' such as ripping out materials, moving materials, some use of power tools, assisting with deliveries, assisting Red and Blue CCDO carded Ops, and all associated tasks as required.Candidates will require:A valid CCDO Green ...
Search Consultancy are looking for 3 CCDO Green OR Red Operatives for an immediate start in Abingdon, Oxfordshire.Commercial projectRoofing and cladding removalP3 Face Fitted preferred - if your certificate has lapsed we can assist10 hours per day paidFree parking on siteDuties will include general aspects, using power tools, clearing areas of works, assisting burners, moving materials for egress, taking in deliveries, and all associated tasks as required.Candidates will require:A valid CCDO Gre ...
We are seeking an experienced CDM Site Supervisor to support a prestigious cultural project in Central London.This is a unique opportunity to work on a major museum fit-out project, acting as the key link between the client team and the Principal Contractor, ensuring the safe movement and installation of valuable artefacts within a live construction environment.LocationCentral LondonContract Duration22 June 2026 – End of September 2026 (with the possibility of extending into October)HoursF ...
We are looking for HGV 1 drivers to work day shift for our depot in Bradford.Working for a general haulage company, you will be delivering anywhere within the UKYou must of held your HGV 1 drivers licence for a minimum of 2 years You will hold a valid CPC and digi tacho card and have no more than 6 minor endorsements. No DD's or DR's need applyMonday to Friday shift patterns, weekends available. You will be aged over 21 years old.You should be physically fit and have a 'can ...
VGC Group are currently recruiting for a Welfare Cleaner on a construction project based in Saxmundham, Suffolk. This opportunity is available for an immediate start, offering consistent weekday hours. Role Details: Role- Welfare Cleaner Location- Saxmundham, Suffolk Pay- £14.38-£16.80 (PAYE) per hour dependent on experience Hours- Part time and full time hours available, must be working 5 days per week. The successful candidate will have: *Previous cleaning experience *Good understa ...
CNC Grinding Machinist - Aerospace ManufacturingOverviewWild Recruitment is partnering with a leading Aerospace manufacturer seeking experienced CNC Grinding Machinists to join their dynamic team. This is an excellent opportunity to work on high-precision components in a supportive and forward-thinking environment.Contract: Until July 2027Key ResponsibilitiesSet up and operate CNC grinding machines (surface and cylindrical).Interpret and work from complex aerospace engineering drawings and proce ...
CNC MACHINE OPERATORLocation– Larne (Northern Ireland)Type of role – Full time ongoingSalary - £14.27-£28.54/hrHours– Monday to Thursday (37.5hrs/week) – days and nightsAbout the RoleCaterpillar is looking for skilled and motivated CNC Machine Operators to join its manufacturing team in Larne. This is an exciting opportunity to work in a world-class manufacturing environment, operating advanced CNC machinery to produce high-quality components for Caterpillar p ...
CNC Machinist (Fanuc Experience)Location: London NW9Pay Rate: £15.00 - £16.00 per hour + holiday accruedWorking Hours:Monday to Thursday: 07:30 - 17:00Fridays: OFF (38 hours per week)Some flexibility may be requiredJob Overview:We are currently seeking an experienced CNC Machinist with strong Fanuc control experience to join a well-established engineering company based in NW9, London. This is a fantastic opportunity for a skilled machinist who is looking for stable hours and a four-d ...
Location: Titchfield, near Fareham, HampshireContract: PAYE (running to June 2027)About the OpportunityWe are growing our team and hiring x9 machinists for contract roles at our well-equipped manufacturing site in Titchfield. Opportunities are available across the machine shop.In Spring 2027, the role will transfer to a brand-new, state-of-the-art facility in Lee-on-the-Solent - a European Centre of Excellence with significant investment in new machinery. This is a truly exciting time to be part ...
Techniche Global is supporting an international Oil & Gas engineering company with appointing a number of CNC Machinists for their facility in Barrow-in-Furness. These roles are initially offered as 6-month contracts, with a expectation of extension based on workload and performance.CNC Machinist (Operator / Setter) The Role: Focuses on setting and operating machinery according to strict procedures, maintaining equipment, and ensuring precision component manufacturing. Contract: Initia ...
Manual Machinist - Aerospace ManufacturingWild Recruitment is partnering with a leading Aerospace manufacturer to recruit an experienced Manual Machinist. This is a fantastic opportunity to join a high-performing team in a precision engineering environment.Contract: Until July 2027Key ResponsibilitiesSet up and operate manual machine tools including Jig Bores, lathes, and mills.Interpret and work from complex engineering drawings and specifications.Manufacture and rework components to tight tole ...
CNC Milling Machinist - Aerospace ManufacturingJoin a leading aerospace manufacturer and take your CNC machining career to the next level!Wild Recruitment is seeking experienced CNC Milling Machinists to support precision engineering projects for the aerospace sector.Contract: Until July 2027What You'll DoSet up and operate 3/4/5-axis CNC milling machines.Interpret complex aerospace engineering drawings and process specifications.Manufacture components to exact tolerances and surface finishe ...
TeamJobs are seeking experienced and skilled CNC Turner Operative on a Weekend Night Shift/ Night Shift to join our client's team in Yeovil. The successful candidates will be responsible for CNC turning of aerospace components in strict accordance with manufacturing instructions, specifications, and regulatory requirements.Location: Yeovil, SomersetPay Rate Weekend Shift: £23.02 p/h - £29.27 p/h, rising to £23.46 p/h - £29.83 p/h after 12 weeks onsite.Working hours: 1 ...
CNC Turning Machinist - Aerospace ManufacturingOverviewWild Recruitment is partnering with a leading aerospace manufacturer seeking experienced CNC Turning Machinists to join their dynamic team. This is an excellent opportunity to work on precision components for cutting-edge aerospace projects.Contract: Until July 2027Key ResponsibilitiesSet up and operate CNC lathes using Fanuc control systems.Interpret and work from complex aerospace engineering drawings and process specifications.Manufacture ...