Dutton Recruitment (Sheffield Engineering) are currently recruiting:We are looking for a Welding Inspector for a long term contract in Wallsend for an immediate start.This will be working on the backshift.Rate of pay is £27.84 per hour (first 38 hours), £36.19 per hour (weekday overtime after 38 hours), £41.76 per hour (Saturday) and £55.68 per hour (Sundays and Bank Holidays).Immediate start available.The successful candidate will be CSWIP 3.1 qualified, and confident wi ...
We are looking for an experienced Electrical Technicians/Electrical Rolling Stock Technicians to carry out maintenance on Rolling stock based out of the company’s depot in Newcastle. This role is a 6 – 8 month contract with possible extension and has an attractive rate (Ph) of £30.62 LTD The role is working an average 36 hour week on a shift roster covering mainly Nights, with only 3 days worked per week! Ex forces, Automotive , Aircraft, Rolling Stock and other trans ...
Wallsend, Tyne and Wear, United Kingdom
£26 - £28/hour plus travel allowance over 60 miles
Ambitek is recruiting for a 6G Coded MIG WelderThe role is temp ongoing but there are certainly opportunities to go permanent.Ambitek is a leading provider of technical recruitment services across the UK providing permanent and temporary solutions to some amazing clients.6G Coded MIG Welder Job Requirements * Experience as a 6G Coded welder * Comfortable reading engineering drawings * Worked with thick plate and pipe * Extensive MIG experience on thick plate * Experience of fabricatingEducation/ ...
Basic rate £23.50 per hour, subject to passing a 6G applicable welding test.Number of positions available - X 4Start date would be ASAP.Working hours basic are 42 per week – 7am to 4pm Mon – Thurs and 7am to 3.30pm FriOvertime, if required, is longer shifts per day or Sat / Sun working.Must be 6G coded.Must have right to work in the UK.Contract to last until Early 2025, with furthers scope of work expected imminently.Please apply here on CV Library or conatct us on;info@ukps.lt ...
Stick welder required Saturday & Sunday at Nissan.CSCS required.£27ph10hr shift
Are you a Controls Engineer with SCADA/PLC experience?Are you looking for your next contract?One of our clients in Newcastle is looking for a Controls Engineer with experience in the Subsea industry.This company is leading the way in the off shore equipment design and dominating the offshore engineering space. The client has won a number of projects which requires contract staffing resource. This role is for an initial 6 months starting ASAP (extensions expected)This role is based in the Newcast ...
TXM Recruit are looking for an experienced Procurement Assistant to join an expanding team based in NewcastleThis role is a 6-8 months contract with possible extension and has an attractive rate (ph) of £23.53 LTDThe role is a day shift 36 hours per week, working 4 out of the 5 weekdays (Monday-Friday)Key Responsibilities:Procure goods and services efficiently and cost-effectively, in line with corporate principles and policies.Offer professional advice on procurement and inventory matters ...
Manpower Engineering are delighted to bring to the market the position of a Mechanical Maintenance Technician for our client based in Gateshead, Tyne and Wear.You will be working for experts in the proud craft of making paints and coatings, setting the standard in colour and protection since 1792.As part of a well established maintenance team you will be carrying out preventative and reactive maintenance on plant equipment, promoting safe working practices and responding to emergency breakdowns ...
Currently require a Mechanical Fitter for a start on Monday on the team valley in Gateshead for around 2 weeks work. Job is assisting with a machine move in a factory environment
We are looking for a Storesperson for a key engineering client based out of the company’s depot in Newcastle. This role is a 6 – 8 month contract with possible extension and has an attractive rate (Ph) of £27.52 Ltd The role is working Permanent Nights on a 36 hour week the shift roster will be covering 7 Days. Role Responsibilities To ensure goods are correctly booked in on the computer system, correctly packaged and despatched according to specified ...
We are looking for an experienced Electrical Technicians/Electrical Rolling Stock Technicians to carry out maintenance on Rolling stock based out of the company’s depot in Newcastle. This role is a 6 – 8 month contract with possible extension and has an attractive rate (Ph) of £30.62 LTD The role is working an average 36 hour week on a shift roster covering mainly Nights, with only 3 days worked per week! Ex forces, Automotive , Aircraft, Rolling Stock and other trans ...
We are looking for an experienced Mechanical Technicians/Rolling Stock Technicians to carry out maintenance on Rolling stock based out of the company’s depot in Newcastle. This role is a 6 – 8 month contract with possible extension and has an attractive rate (Ph) of £30.62 Ltd The role is working an average 36 hour week on a shift roster covering mainly Nights, with only 3 days worked per week! Ex forces, Automotive , Aircraft, Rolling Stock and other transferable ind ...
Calling all Mechanical Fitter(s), are you looking for your next assignment!If so, IRS Recruitment are pleased to be supporting our client to work in the Wallsend area on a long term project until 2025 and beyond.Relevant work experience in an oil and gas or renewable industry environment is essential.The ideal candidate will have the following ceertification and experience.• Be a time served plant or HGV mechanic/fitter or have a proven background in the industry.• Be qualifi ...
Role Details:Newcastle SiteInside IR35£37.50 P/H6-month contractAbout the Role:The Energy Division at ARM is currently seeking a Senior Primary Plant engineer to join a Civil Engineering Business, that offers services within the nuclear sector.Role Purpose: The primary duty of this position is to create HV Plant designs for electrical substation projects with a maximum voltage of 400kV. Along with the general tasks and obligations described below, the precise roles and responsibilities of ...
Castle View Group are looking for experienced platers for a contract based in Wallsend, Newcastle Upon Tyne.Candidates must have heavy fabrication experience and must be able to fabricate from drawings, measure and mark out material accurately and be able to work on their own initiative.Work is expected to last at least 12 months.Pay Rates * Day Shift * Basic - £22.00 per hour (4 day week 40 hours) * Over Time - £28.50 per hour (Friday & Saturday)Please forward current CV to appl ...
Astute's Renewables team is partnering with a global service provider to the renewable energy sector with a focus on safety, efficiency, and innovation. Setting industry standards and contributing to the advancement of the energy sector worldwide to recruit for a HV Service Technician on a 6-month contract for work offshore in the UK.The HV Service Technician role comes with a day rate up to £550 per day depending on experience.Key skills Proven experience in switchgear maintenance (33 ...
The Role: We are seeking Mechanical Design & Senior Design Engineers to work in the subsea / marine / renewable sector to design bespoke mechanical handling & deployment equipment. The unique equipment uses vary from wind turbine monopile installation to subsea trenching, well intervention, deck spreads and walk to work systems. Main Responsibilities:• Ensuring engineering design packages in full compliance with customers requirements and all relevant codes and standards• Carry ...
Time-served pipefitter required for a months work in Wallsend.Dayshift role(Apply online only) Monday to Friday
My client is a long established, leading, Construction and Civil Engineering Consultancy.The company are continually recognised as a world class consultant providing engineering, project and programme management and commercial solutions, to their clients within the energy, infrastructure and Governmental sectors.Providing consistently high results time and time again, they are today supporting many major complex projects and programmes with their skills in commercial and contracts, design and en ...
I am working with a Maritime company that are currently dominating the offshore vessel market and have won a number of projects that require extra resources.The client is looking for an Electrical Design Engineer for a 6 month contract with potential extension.This role is outside IR35. This role is based in Gateshead.The ideal Electrical Design Engineer will have subsea/marine experience and a strong background in EC&I.Requirements:5+ years of experience in electrical designExperience in Au ...
Castle View Group are looking to recruit a number of coded welders to work in a busy engineering company based in Wallsend, Newcastle Upon Tyne.Applicants must be time served and have current in date welding certification.Flux core (136) fillet, coded to EN9606, FM1 / FM2 / FM3 filler wire, all positions.Work is expected to last at least 12 months.Dayshift and nightshfit available.Pay Rates * Day Shift * Basic - £22.00 per hour (4 day week 40 hours) * Over Time - £28.50 per hour (Fri ...
WHAT IS IN IT FOR YOU?£44k per annum Fixed term contract - Maternity CoverCompany Pension - Company Contribution up to 8% Sick PayNO Weekends - Monday to Friday 25 days annual leave plus bank holidaysFree Car Parking Life Assurance THE BUSINESSWestray Recruitment Group are currently seeking an experienced Supply Chain Controller for our client based in the South Tyneside area.We are representing a high volume manufacturer who have put massive investment into supporting their staff through ...
RTL Group are looking for two talented site engineers to work for a major tier 1 client on a highways project in the heart of Newcastle!POSITION SUMMARY:Reporting to the Senior Engineer you will responsible for ensuring that the works elements under your control are delivered to the correct quality and in a safe, timely and cost-effective manner. Working collaboratively with the wider project team to deliver successful project outcomes.KEY RESPONSIBILITIES:· Primary role is to provide eng ...
Are you a skilled and experienced Welder looking for your next adventure?Join our client’s team.Our client has over 40 years specialist experience, providing fabrication and construction services for the offshore, oil & gas, nuclear, aerospace, transport, and architectural industries.Job spec:Flux core (136) fillet and butt welders, coded to EN 9606, FM1 / FM2 / FM3 filler wire, all positions. Codes can be completed at the client site if you don’t have them if certs are all in da ...
We are currently recruiting an experienced and dedicated Fabricator for our engineering client based in South Tyneside.The ideal candidate for this role will possess a strong background in metal fabrication and welding, with a keen eye for detail and a passion for creating high-quality products.Responsibilities:Fabrication and erection/installation. Work includes structural steelwork, utility and feature staircases and balustrade in mild and stainless steel, onsite and offsite fabrication, and w ...
OUTSIDE IR35 - Site Engineer required for major highways improvement taking place in Gateshead area for a national highways contractor. Our clients have an ongoing programme of works in the region and most specifically on this major improvement in the area which requires an experienced Site Engineer with experience in Highways and Structures works. As the successful Site Engineer you will be tasked with control and implementation of works on site, including monitoring and reporting ...
Manpower Engineering are working with a well established data communications business to help them recruit CCTV Engineers for the Newcastle areaIn this role you will be installing, servicing, maintaining, testing and commissioning Intruder Alarm Systems, IP Surveillance Systems and Access Control Systems through the Tyne and Wear regionYou will be liaising with Clients and Alarm Receiving Centres so excellent customer services skills are a must.If you can demonstrate previous experience and gene ...
NRL’s client based in Sunderland are looking to recruit a Document Controller for an ongoing contract basis, preferably starting immediatley. About the role:Position to be site based, Sunderland Working hours: Monday - Friday (08:00 - 17:00)Immediate start preferred Temporary basisDutiesDay to Day activities: The management of all information flow for the project in accordance with the design deliverables release schedules, programmes and management systems. 1. Set ...
I am working with a leading Groundworks contractor based out of the NE and we are currently recruiting for an experienced Site Engineer to complete a new build commercial project with the whole groundwork spackage to be completed.Site Engineer Responsibilities: * Reporting and working with the Project Manager. * Quality assurance. * Setting out all associated works, Drainage, Ducting, Kerbs, Landscaping etc * Liasing with Main contractorsSite Engineer Requirements: * CSCS card. * SMSTS * Civil e ...
We are AMS. We are a global total workforce solutions firm; we enable organisations to thrive in an age of constant change by building, re-shaping, and optimising workforces. Our Contingent Workforce Solution (CWS) is one of our service offerings; we act as an extension of our clients' recruitment team and provide professional interim and temporary resources.We are looking for a General Machinist for a 12-month contract based in Washington on behalf of our globally respected client who devel ...
Pro Contract Jobs
Sterling House,
East Wing, Suit 310E,
Langston Road,
Loughton, IG10 3TS.
Phone No: 0203 371 1252
2024 © Pro Contract Jobs. ALL Rights Reserved.
Powered by: Talenetic Job Board Software