3,191 jobs found

On behalf of our client, we are seeking a Electronics Design Engineer to join my client on an initial 12 month contract. As the Electronics Design Engineer you will be responsible for developing cutting-edge electronic solutions for weapon systems. This will include on board missile sub-systems and Land, Sea and Air based Firing Units. Your role will entail responsibility for the quality and performance of the electronic solution together with providing cost and schedule updates to a project manager. Role: Electronics Design Engineer Pay: Up to 58 per hour via Umbrella Location: ...

World Class Defence Organisation based in Stevenage (the role can be a split of working Onsite and Working From Home) is currently looking to recruit a number of Electronics Design Engineer subcontractors on an initial 12 month contract. Electronic Design Engineers with excellent skills in Analogue Design or Digital Design or Power Design or FPGA are sought after. Job Title: Electronics Design EngineerRate: £58 per hourOvertime Rate: Hours worked over 37 hours per week will be calculated at 'time and a quarter'Location: Stevenage Hybrid / Remote working: This role will involve s ...

We are seeking an experienced Analogue Electronics Engineer to take a technical lead role in the creation and delivery of complex electronic designs. This position offers hands on involvement throughout the entire product development cycle, from shaping early concepts through to integrating and validating finished hardware. The contract is outside IR35, initial 6 months, hybrid (circa 3 days onsite). Although many projects support defence focused equipment and secure systems, applicants with re ...

On behalf of our client, we are looking for a Electronics Engineer to join them on an initial 12-month basis. As Electronics Engineer you will join the Calibration & Maintenance Team, to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment. Some of these tasks include fault finding and repair of test equipment, supporting routine calibrations, commissioning of Test Equipment and drift analysis. Role: Electronics Engineer Pay: 32 - 35 per hour via Umbrella Location: Stevenage Contract: 12 months (possible ex ...

Job Title: Electronics Engineer Duration: 6 12 Months Location: Reading (Onsite) Rate: £45 £50 per hour (Outside IR35) Must have Eligibility for SC Clearance About the Role We are looking for an experienced Electronics Engineer on a contract basis to support the design and development of advanced electronic products and systems for high-reliability applications. Key Responsibilities • Design and develop electronic hardware from concept through to manufacture and test. • Create schematics, support PCB design act ...

Are you an experienced Electronics Engineer with a passion for product design, innovation, and problem-solving? Do you enjoy developing electronic systems from concept through to manufacture? Are you confident working across multidisciplinary teams to deliver high-quality engineering solutions for aerospace, defence, and industrial applications? If so, an exciting opportunity has arisen with a leading manufacturer for an Electronics Engineer to join their dedicated engineering team! Electronics Engineer 48 - 54 p.h. Monday to Friday (4 days on site) OUTSIDE IR35 Contract / 6-12 months ...

Our engineering client is currently looking for 2 x Production Technicians to work from their Eastleigh base. This is an excellent opportunity to join a growing and innovative company. The job will involve the following duties: Performs highly technical tasks involving electronic, assembly, test, and repair processes. Troubleshooting of electronic assemblies under engineering supervision, using electronic bench equipment such as multi-meters and oscilloscopes. Hand soldering assembly of discret ...

Electronics Test Engineer - Outside IR35 £45 - 65/hour Andover | Hybrid Our client is looking for an Electronic Test Engineer to support the development and implementation of advanced semiconductor testing capabilities within a specialist electronics laboratory environment. This contract will focus on establishing robust test methodologies for complex devices and electronic components, supporting both component authentication and counterfeit detection act ...

Imagine stepping into a fast-paced, world-class European Research & Development Centre where your technical expertise directly fuels innovation. We are partnering with a large global manufacturer to find a skilled Electronics & Instrumentation Technician who thrives on variety, precision, and cutting-edge technology. If you are looking for a role where no two days are the same; balancing independent problem-solving with collaborative, multi-million-pound facility upgrades this is your chance to make a tangible impact with an industry leader. Location: Peterborough Contract: 12-Month Hours: Mon-Thu 8:00 AM - 4:0 ...

Electronics & Instrumentation TechnicianPeterborough - Fully Onsite£25.00 - £25.65 per hour12-Month Contract (Likely Extension)We're recruiting for an Electronics & Instrumentation Technician to join a leading engineering and R&D facility in Peterborough.This is a hands-on role supporting advanced test and development programmes, offering exposure to calibration, fault-finding, preventative maintenance, instrumentation, and facility upgrade projects.Key Responsibiliti ...

OverviewExpleo are seeking an experienced Embedded Software Engineer to support the delivery of a software engineering work package for ongoing vehicle intercom development. The role focuses on developing low-level peripheral drivers and system software for an embedded platform based on the NXP i.MX8 (A53 core) processor family.The work will be delivered in bare-metal C, with integration into an existing embedded codebase. The system may optionally involve ThreadX RTOS and uBoot bootloader compo ...

Embedded Software Engineer | Outside IR35 | CambridgeThe client is looking for specialist embedded software development services to deliver defined firmware components for an embedded Linux platform.They are looking for multiple software engineers, so I encourage you to apply if you have any recent experience developing software on an embedded Linux platform.Scope of Services * Development of embedded Linux firmware for target hardware platforms (OMAP & iMX6), including kernel configuration, ...

Embedded Software EngineerWhiteley (Hybrid) – SC Required – Initial 6 month contract (Inside IR35)About the OpportunityWe are recruiting on behalf of a technology organisation that specialises in the research, design, and development of advanced wireless and critical RF communication systems used in mission-critical environments including defence, uncrewed and autonomous systems, government, and broadcast.They are seeking an Embedded Software Engineer to join their team working on a ...

Emissions TechnicianPeterborough (Site based)Initial 12 Month Contract – likely to be extended37 Hours a week Mon-Thurs 8am-4pm, Fri 8am-3:30pmThe Emissions Technician will manage compressed gas systems and install, service, calibrate and maintain a fleet of emissions measurement equipment. This will include assisting engineers in conducting technical investigations of current and future emissions measurement technologies and processes in a laboratory environment.What the Emissions Technic ...

Job Title: Raft StrippersLocation: Near Burton-on-TrentDepartment: Engine Strip & TransmissionContract Type: Hourly - Ongoing ContractShift: days 7am to 4pm and 7am to 1pm Friday - 40 hoursRate: CompetitiveJob Overview:We are currently recruiting for a Night Shift Engine / Voith / Raft Stripper to join our Engine Strip & Transmission team near Burton-on-Trent. This hands-on role involves the dismantling and reassembly of engines in line with manufacturer and warranty standards. The succe ...

Job Title: Engine StripperLocation: Burton-on-Trent, StaffordshireDuration: 3+ months' Hours: Monday to Thursday - 07:00 to 16:00, Friday 07:00 to 13:00We are currently recruiting for a Mechanical Technician for an ongoing contract based in the Burton-on-Trent area for an engineering client. Candidates must have own transport due to site location.This role would involve the dismantling and re-assembling of engines in line with Manufacturer standards/warranty. Key Duties & Responsibilitie ...

Job: Engine Test Engineer Location: Barton Under Needwood, StaffordshireDuration: 3 months +Hours :6 am -3pm Mon to Thurs, 6am -12pm Friday Own transport recommended due to site locationPosition Summary:The testing and validation of Rail Engines, Transmission, Powerpacks and Cooler Groups. The role will require familiarity with the operation of diesel engines, electrical and electronic control systems.Key Accountabilities/ responsibilities:* Installation into the test cells and testing of produc ...

Site Engineer Location: Aylesbury, Buckinghamshire Project Type: Major Infrastructure / Fencing Works Duration: Long-Term Opportunity Employment Type: Freelance (Outside IR35) We are seeking an experienced Site Engineer to join our team on a long-term fencing package within a major infrastructure project based in Aylesbury. This is an excellent opportunity for an engineer who enjoys being involved in both the technical and operational aspects of project delivery. Key Responsibilities Interpret ...

Site Engineer   Location: Aylesbury, Buckinghamshire Project Type: Major Infrastructure / Fencing Works Duration: Long-Term Opportunity Employment Type: Freelance (Outside IR35)   We are seeking an experienced Site Engineer to join our team on a long-term fencing package within a major infrastructure project based in Aylesbury. This is an excellent opportunity for an engineer who enjoys being involved in both the technical and operational aspects of project delivery.   Key Respons ...

Site/Setting Out Engineer – RAF Base, OxfordSite/Setting Out Engineer RequiredRAF Base, OxfordImmediate Start AvailableContract / Freelance OpportunityWe are currently seeking an experienced Site/Setting Out Engineer to join a project based on an RAF facility in Oxford. The successful candidate will play a key role in supporting a variety of groundworks and civil engineering packages.Key ResponsibilitiesSetting out and surveying works across the project. Supporting and managing groundworks ...

Exciting Engineering & Foundry Opportunities in New Zealand We are currently seeking experienced and trade-qualified professionals to join a leading global manufacturer in New Zealand. This is an outstanding opportunity to gain international experience while working with advanced engineering and manufacturing processes in a world-class production environment. The successful candidates will initially be offered a 12-month work contract, with the opportunity to transition to a further visa and ex ...

Exciting Engineering & Foundry Opportunities in New ZealandWe are currently seeking experienced and trade-qualified professionals to join a leading global manufacturer in New Zealand. This is an outstanding opportunity to gain international experience while working with advanced engineering and manufacturing processes in a world-class production environment.The successful candidates will initially be offered a 12-month work contract, with the opportunity to transition to a further visa and e ...

Engineering AdministratorLocation: WashingtonSalary: NegotiableType: Temporary ongoing (long term)Hours: 38 hours per week – Mon – Thurs: 08:15am – 5:00pm – Fri 08:00am – 1:00pmImperial Recruitment Group are working with a key client who are looking to recruit a Process Engineering Administrator on a temporary ongoing basisMain Purpose:The Contract Engineering Administrator is a temporary role designed to support the Contract Engineer and the wider Process Engineeri ...

We are looking for an experienced and proactive Engineering Buyer to join a purchasing team for an stablished engineering business. You will oversee the procurement of goods, materials, and services to support operational needs, focusing on cost efficiency, quality standards, and on-time delivery.Key Responsibilities: * Manage day-to-day purchasing of engineering materials. * Review system data daily to action stock levels and issue purchase orders. * Build and maintain effective relationships w ...

Engineering Configuration ManagerFilton (Hybrid - typically 60% onsite, subject to change) 35 hours per week | 4.5-day working pattern Contract until July 2027 (with potential extension) £28.41 per hour (PAYE) / £38.00 per hour (Umbrella)About the RoleGuidant Global is partnering with Airbus to offer an exciting opportunity for an Engineering Configuration Manager to join the Digital Wing team. You'll play a key role in shaping and managing configuration across multiple aircraft ...

A contract position Outside IR35 Hybrid working (2 days on site) West Midlands Our client, a prominent entity in the automotive sector, is currently seeking a skilled CAD Draughtsperson for a contract opportunity. This role is critical for delivering high-quality drawings for Automotive Powertrain and Fuel System components. Candidates much be happy in a pure drawing role, amending/updating existing drawings etc. rather than designing. Key Responsibilities: Deliver high-quality drawings for Pow ...

Machine Clean-Out LabourerLocation: Accrington Salary: £13.83 per hour Hours: Monday to Thursday, 8:00am - 4:30pm | Friday 8.00am - 1:00pmIntroductionES Recruit are currently recruiting for a Machine Clean-Out Labourer to join a well-established and growing manufacturing business.As a Machine Clean-Out Labourer, you will play a key role in maintaining production equipment and ensuring machinery operates efficiently. This position is ideal for candidates with experience in manufacturing, in ...

Castle View Group are looking to recruit experienced engineering labourers for a contract with a busy engineering company based in Newcastle Upon Tyne.Duties will include * Grinding, drilling, use of hand held tools * Dressing fabrications * Heavy lifting around site * General in house duties * Adhering to health and safety regulationsHours: 7.00am to 5.30pm (10 hour shift) Monday to Thursday. 40 hours basic working week, including guaranteed 3 hours over time every week.£13.77 per hour Mo ...

Castle View Group are looking to recruit experienced engineering labourers for a contract with a busy engineering company based in Newcastle Upon Tyne. Duties will include Grinding, drilling, use of hand held tools Dressing fabrications Heavy lifting around site General in house duties Adhering to health and safety regulations Hours: 7.00am to 5.30pm (10 hour shift) Monday to Thursday. 40 hours basic working week, including guaranteed 3 hours over time every week. 13.77 per hour Monday-Thursday ...

Engineering Planner or Maintenance Coordinator   Days Monday - Friday.   The Engineering Planner / Engineering Maintenance Planner   Working with a market-leading manufacturer on contract for 12 months PAYE and Outside IR35 options available £200 - £300  per day Location 12 Months Ealing The Engineering Planner/ Engineering Maintenance Planner will work closely with Site Engineering Manager and Engineering Team Leaders, to maximize the performance of engineering o ...