354 jobs found

Role: CAD Technician Location: Remote Rate: £37 p/h Duration: 6 Months (potential to go up to 12 months) Industry: AMP8 Wastewater We are seeking an experienced CAD Technician with a mechanical or civil engineering background to support a programme of completed infrastructure and engineering schemes attached to AMP8 Wastewater projects. This will be to assist a Design & Build contractor with multiple projects nationwide. Therole can be fully remote. The primary responsibility will be u ...

Role: CAD Technician Location: Remote Rate: £37 p/h Duration: 6 Months (potential to go up to 12 months) Industry: AMP8 Wastewater We are seeking an experienced CAD Technician with a mechanical or civil engineering background to support a programme of completed infrastructure and engineering schemes attached to AMP8 Wastewater projects. This will be to assist a Design & Build contractor with multiple projects nationwide. Therole can be fully remote. The primary responsibility will be u ...

Air Conditioning Installation Engineer - TXM Recruit are currently looking for a AC Engineer to complete commercial installation work, at a busy distribution depot in RugbyAs a AC or HVAC Engineer, you will be responsible for the installation of various air handling units, fan coil units, and associated works including VRV systems.Requirements * City & Guilds level 3 in Refrigeration and Air Conditioning. – Or equivalent. * IPAF (desirable) * CSCS Card * F-Gas (desirable)£260 per ...

AC Engineer - We are currently looking for AC installation engineers to to join a long term Mechanical project, in the Southeast of England.This work will be an ongoing contract for the right candidates.The work will consist of: * FCU installs * AC installs * Repairs and PPM * Surveys * Ventilation works and ideally ductwork alsoMonday-Friday, 8 hours per day. 3-5 days per week depending on workload (usually 5 days).Pay: £250 per shift (CIS)Van and tools required.Requirements * NVQ Level 2 ...

Air Conditioning Installation Engineer - TXM Recruit are currently looking for a HVAC Engineer to complete commercial installation work, at a Supermarket Store in Central London. 3-week contract, strong possibility of extension.As a AC or HVAC Engineer, you will be responsible for the installation of various air handling units, fan coil units, and associated works.Requirements * City & Guilds level 3 in Refrigeration and Air Conditioning. – Or equivalent. * F-Gas (desirable) * CSCS Car ...

Air Conditioning Installation Engineer - TXM Recruit are currently looking for a AC Engineer to complete commercial installation work, at a busy distribution depot in RugbyAs a AC or HVAC Engineer, you will be responsible for the installation of various air handling units, fan coil units, and associated works including VRV systems.Requirements * City & Guilds level 3 in Refrigeration and Air Conditioning. – Or equivalent. * IPAF (desirable) * CSCS Card * F-Gas (desirable)£32 per ...

Air Conditioning Installation Engineer - TXM Recruit are currently looking for a AC Engineer to complete commercial installation work, at a busy distribution depot in RugbyAs a AC or HVAC Engineer, you will be responsible for the installation of various air handling units, fan coil units, and associated works including VRV systems.Requirements * City & Guilds level 3 in Refrigeration and Air Conditioning. – Or equivalent. * IPAF (desirable) * CSCS Card * F-Gas (desirable)£29 per ...

We're recruiting Aluminium Welders (MIG/TIG) to support the welding of aluminium framework assemblies on a long term project. All candidates must complete and pass an on site weld test prior to starting.ResponsibilitiesMIG/TIG welding on aluminium framework assembliesWorking from drawings/schematics and job packsProducing consistent, high quality welds suitable for inspection/acceptanceMaintaining safe working practices and following site proceduresSupporting general fabrication tasks as req ...

Applications Engineer - Stafford, UK 6 month contractOur client, a leading provider of innovative engineering solutions, is hiring for a talented Applications Engineer to join their dynamic team in Stafford. This is a fantastic opportunity to work with a forward-thinking organisation dedicated to technological excellence and customer satisfaction across manufacturing, automation, and industrial sectors. What you'll be doing: * Providing technical support and advice to customers and internal ...

Our client, is seeking an experienced Arboriculture Specialist to join their team on a contract basis. Working primarily at sites and the depot, this role will involve professional tree inspection, enquiry management, works ordering, and auditing. This is an excellent opportunity for an arboriculture professional to contribute to highways maintenance and development projects.Key Responsibilities:Providing professional, accurate advice to line managers, county and district members, and in-house s ...

I am looking for some Mechanical technician to support a client with some assemble hydraulic power units, subassemblies, and components (pumps, motors, valves, filters, reservoirs) based on technical schematics and, engineering drawings.Please click to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the ve ...

Job PurposeTo support the effective coordination of street works activities on the public highway, ensuring all works are planned, monitored, and delivered in compliance with relevant legislation (e.g., New Roads and Street Works Act 1991) and council policies. The role aims to minimise disruption to road users while maintaining safety and efficiency across the road network.Key ResponsibilitiesAssist in the coordination and scheduling of utility and highway works across the network.Maintain and ...

Assistant Tenders Project Manager – 6-Month Contract (Inside IR35)Location: Altens, Aberdeen (AB12 3LY)Hours: 37 hours per week (Monday–Thursday 8 hours, Friday 5 hours)Contract: Initial 6-month contract with potential for permanent employmentAbout the RoleWe are seeking an experienced Assistant Project Manager to join our team in Aberdeen. This is an exciting opportunity to manage projects from tender stage through to completion, ensuring successful delivery in line with scope, sche ...

Auto Door And Gate Service Engineer (Sub-Contract)V7 Recruitment is working in partnership with a well-established organisation in the fire, security, and access solutions sector. Due to continued growth and a strong pipeline of projects, we are seeking experienced Automatic Door Engineers to carry out service and maintenance work across north west. The Role Work Type: Service & MaintenanceSystems Covered:Automatic Doors: Swing, Sliding, Bi-FoldIndustrial Doors: Roller Shutters, Se ...

Senior Revit Designer - Civil, Structural & Architectural (CS&A) Contract | £36-£41/hour (Inside IR35) Warrington | Hybrid - 3 days per week in the office Security: Sellafield experience and existing PP Pass is essential.We are seeking an experienced Autodesk Revit Designer to support engineering design delivery within a highly regulated environment. This role will focus on the development and modification of Civil, Structural & Architectural (CS&A) and mechanical pip ...

BIM Coordinator - ContractCentral London£300.00 per day (outside IR35)We are urgently looking for an experienced BIM Coordinator for an ongoing contract role in London.You will coordinate BIM models across civil, structural, and M&E disciplines, ensure ISO 19650 compliance, resolve clashes, and support project teams with hands-on technical BIM input.Our client needs candidates with strong experience with Revit, Navisworks, BIM 360 (or similar) and a background in civil, structural, or ...

Base Engine Development EngineerPeterborough – fully on site PE1Initially 12 months – very long term extensions are highly likely£31.50ph PAYE + holiday + pension or £42.75 umbrella rateWe’re excited to be recruiting for this opportunity with a global engineering manufacturer. The team is responsible for supporting both new product introduction (NPI) and existing engine platforms, working across a range of component revisions and development activities as designs pr ...

Lead BIW EngineerHybrid- Oxford6-month contract with Potential ExtensionDay rate: £32 - £42 per hour Inside IR35Lead BIW EngineerAre you ready to push the boundaries of electric vehicle design? We are seeking a visionary Lead BIW Engineer to head the development of next-generation, premium Upper Body structures and moving closure systems. Starting from a clean sheet, you will use your technical expertise to create lightweight, high-performance architectures that set new global benchm ...

On behalf of our client, we are seeking to recruit a Buyer on an initial 6-month contract. As the Buyer, you will support procurement activities across multiple UK sites, providing local sourcing support, approving purchase orders, and building strong relationships with internal stakeholders. Based in Belfast, you will manage a diverse portfolio covering Manufacturing Technologies Products & Services and Real Estate & Facility Management, helping to deliver effective procurement solution ...

Job Title CAD Designer Summary Join our client’s dynamic design and engineering team as a CAD Designer in West Cumbria. This role is ideal for professionals with experience in AutoCAD and/or Revit, BIM or Navisworks, who thrive on producing accurate technical drawings and models for complex interior fit-out and building projects. It’s a fantastic opportunity to work on high‑profile projects with a market‑leading global organisation. Hourly Rate: £33.00 to £3 ...

2D AutoCAD DraughtspersonRate: £32.50 - £35.00 p/h (Outside IR35)Initial 2-month contract (likelihood of extension)Bradford Halifax Huddersfield WakefieldAutoCAD / 2D Draughting I am currently recruiting on behalf of a key client based in West Yorkshire. Our client is an established engineering and manufacturing business, designing and manufacturing specialist equipment for a range of high-profile industries. Due to an increase in workload, they are looking for an experienced 2D Auto ...

Contract Steel DetailerCheltenhamUp to £35.00 per hourImmediate start availableThis specialist architectural metalwork designer, fabricator and installer are looking for an experienced detailer/draughtsmanYou'll be producing drawings to support the design of items such as Louvres, solar shading, plant screens, balconies, structural and non structural steelwork.They take on many bespoke projects so your work will not be limited to these items alone.Contact Darryl Yates at Flux Consultin ...

CNC Miller Programmer/Setter:* You must able to Program, Set & operate Using Okuma but Heidenhain and Fanuc controls are similar (Essential)* FeatureCAM experience is an advantage but not essential.Rail Engineering Workshop (Lillie Bridge Depot) - precision machining, manufacturing, and component production for London Underground/Transport engineeringTo manufacture items and make, modify or repair components.To set and operate a full range of plant and equipment including: saws, drills, mill ...

CNC Miller – Contract EveningsMon–Thurs 2pm–11pm / Fri 12pm–8pmNorthampton £28–£35 per hour (Inside IR35)EMBS Engineering is currently recruiting for a CNC Miller to join a precision engineering company located in Northampton, working on a 6 month contracting basis.Our client is a market leading precision engineering, advanced manufacturing business that specialises in machining complex, medium sized components for highly regulated industries including M ...

Dutton Recruitment (Sheffield Engineering) are currently recruiting:We are looking for CNC Miller Machinist for a 3-month contract based with our client in RotherhamImmediate start available.Rate of pay £28.00 per hour (depending on experience)This will be working on a weekly shift rotation of:Week 1: Monday to Thursday - 6am till 4pmWeek 2: Monday to Thursday - 8pm till 6amAbout the role:Operate and set CNC machines to produce precision parts according to specificationsSet up and load mat ...

CNC Turner – Contract (Inside IR35)Location: SheffieldShifts: Various shifts availableContract Length: 3 monthsPay: £30.00 – £33.00 per hour (shift‑dependent)Agency: Actio RecruitmentActio Recruitment are supporting a precision engineering business in the Sheffield area who require an experienced CNC Turner on a contract basis (inside IR35).The RoleYou will be responsible for setting and operating CNC lathes using Fanuc controls, producing high‑quality compo ...

Due to continued growth are currently seeking CS&A Engineers to join our team, these positions support hybrid working and can be based across our office network within the UK - Stockton, Newcastle, Bristol, Gloucester, and Westlakes.Role- CSA EngineerLocation- Stockton, Newcastle, Bristol, Gloucester, and WestlakesRate- £35.00-£50.00 per hour Inside IR35As a CS&A Engineer your responsibilities could include:Technical quality and excellence of your work and the work of th ...

Imagine a role where the open road is your office, no two days are the same, and your technical expertise directly impacts industrial efficiency across the region. We are partnering with a global client; a powerhouse division of a large global manufacturer, to find a self-motivated, autonomous Chemical Technician. If you combine a strong background in water chemistry with the natural ability to build fantastic customer relationships, this is your opportunity to secure a long-term career with a t ...

Civil CAD Technician / Civil 3D Technician Contract Role | Outside IR35 | Immediate Start   Carrington West are recruiting for an experienced Civil CAD Technician / Civil 3D Technician to support a busy civil engineering consultancy on a contract basis.   This is an excellent opportunity for a skilled technician to join an established team and contribute to a diverse portfolio of projects, including education, commercial, industrial, and infrastructure schemes.   The RoleYou will ...

Freelance Clerk of Works - Civils & Groundworks Surrey Area Immediate Requirement £(Apply online only) Day Rate DOE (LTD / CIS options)We are looking for a Freelance Clerk of Works to support the delivery of civils and groundworks schemes across the Surrey area on an immediate basis. The Freelance Clerk of Works will act as the key link between site operations and Contracts Managers, ensuring works are progressing smoothly and that materials, plant, and labour are in place to maintain ...