119 jobs found

Air Conditioning Installation Engineer - TXM Recruit are currently looking for a AC Engineer to complete commercial installation work, at a busy distribution depot in RugbyAs a AC or HVAC Engineer, you will be responsible for the installation of various air handling units, fan coil units, and associated works including VRV systems.Requirements * City & Guilds level 3 in Refrigeration and Air Conditioning. – Or equivalent. * IPAF (desirable) * CSCS Card * F-Gas (desirable)£260 per ...

AC Engineer - We are currently looking for AC installation engineers to to join a long term Mechanical project, in the Southeast of England.This work will be an ongoing contract for the right candidates.The work will consist of: * FCU installs * AC installs * Repairs and PPM * Surveys * Ventilation works and ideally ductwork alsoMonday-Friday, 8 hours per day. 3-5 days per week depending on workload (usually 5 days).Pay: £250 per shift (CIS)Van and tools required.Requirements * NVQ Level 2 ...

Air Conditioning Installation Engineer - TXM Recruit are currently looking for a AC Engineer to complete commercial installation work, at a busy distribution depot in RugbyAs a AC or HVAC Engineer, you will be responsible for the installation of various air handling units, fan coil units, and associated works including VRV systems.Requirements * City & Guilds level 3 in Refrigeration and Air Conditioning. – Or equivalent. * IPAF (desirable) * CSCS Card * F-Gas (desirable)£32 per ...

We're recruiting Aluminium Welders (MIG/TIG) to support the welding of aluminium framework assemblies on a long term project. All candidates must complete and pass an on site weld test prior to starting.ResponsibilitiesMIG/TIG welding on aluminium framework assembliesWorking from drawings/schematics and job packsProducing consistent, high quality welds suitable for inspection/acceptanceMaintaining safe working practices and following site proceduresSupporting general fabrication tasks as req ...

Senior Revit Designer - Civil, Structural & Architectural (CS&A) Contract | £36-£41/hour (Inside IR35) Warrington | Hybrid - 3 days per week in the office Security: Sellafield experience and existing PP Pass is essential.We are seeking an experienced Autodesk Revit Designer to support engineering design delivery within a highly regulated environment. This role will focus on the development and modification of Civil, Structural & Architectural (CS&A) and mechanical pip ...

Base Engine Development EngineerPeterborough – fully on site PE1Initially 12 months – very long term extensions are highly likely£31.50ph PAYE + holiday + pension or £42.75 umbrella rateWe’re excited to be recruiting for this opportunity with a global engineering manufacturer. The team is responsible for supporting both new product introduction (NPI) and existing engine platforms, working across a range of component revisions and development activities as designs pr ...

On behalf of our client, we are seeking to recruit a Buyer on an initial 6-month contract. As the Buyer, you will support procurement activities across multiple UK sites, providing local sourcing support, approving purchase orders, and building strong relationships with internal stakeholders. Based in Belfast, you will manage a diverse portfolio covering Manufacturing Technologies Products & Services and Real Estate & Facility Management, helping to deliver effective procurement solution ...

CNC Miller Programmer/Setter:* You must able to Program, Set & operate Using Okuma but Heidenhain and Fanuc controls are similar (Essential)* FeatureCAM experience is an advantage but not essential.Rail Engineering Workshop (Lillie Bridge Depot) - precision machining, manufacturing, and component production for London Underground/Transport engineeringTo manufacture items and make, modify or repair components.To set and operate a full range of plant and equipment including: saws, drills, mill ...

CNC Miller – Contract EveningsMon–Thurs 2pm–11pm / Fri 12pm–8pmNorthampton £28–£35 per hour (Inside IR35)EMBS Engineering is currently recruiting for a CNC Miller to join a precision engineering company located in Northampton, working on a 6 month contracting basis.Our client is a market leading precision engineering, advanced manufacturing business that specialises in machining complex, medium sized components for highly regulated industries including M ...

Due to continued growth are currently seeking CS&A Engineers to join our team, these positions support hybrid working and can be based across our office network within the UK - Stockton, Newcastle, Bristol, Gloucester, and Westlakes.Role- CSA EngineerLocation- Stockton, Newcastle, Bristol, Gloucester, and WestlakesRate- £35.00-£50.00 per hour Inside IR35As a CS&A Engineer your responsibilities could include:Technical quality and excellence of your work and the work of th ...

Imagine a role where the open road is your office, no two days are the same, and your technical expertise directly impacts industrial efficiency across the region. We are partnering with a global client; a powerhouse division of a large global manufacturer, to find a self-motivated, autonomous Chemical Technician. If you combine a strong background in water chemistry with the natural ability to build fantastic customer relationships, this is your opportunity to secure a long-term career with a t ...

Civil CAD Technician / Civil 3D Technician Contract Role | Outside IR35 | Immediate Start   Carrington West are recruiting for an experienced Civil CAD Technician / Civil 3D Technician to support a busy civil engineering consultancy on a contract basis.   This is an excellent opportunity for a skilled technician to join an established team and contribute to a diverse portfolio of projects, including education, commercial, industrial, and infrastructure schemes.   The RoleYou will ...

Mechanical FitterLocation: BristolContract Type: 18 months Hours: 40 hours per weekWorking Pattern: Monday to Friday, 07:00am – 15:30pmSalary: £27.34 Umbrella per hour (Inside IR35)About the RoleWe are currently recruiting for a Mechanical Fitters to join a busy Heavy Maintenance team in Bristol. This role is responsible for carrying out the stripping down and rebuilding rail vehicles, as well as carry out overhaul, and repairs in line with company procedures, engineering standards, ...

Commercial Electrician (18th Edition/Testing & Inspection)Mobile role covering Cambridge and surrounding areas£250 per day (Umbrella/Limited Company) Outside IR35Initial 3 year contract with long term extension opportunitiesExcellent opportunity for a Commercial Electrician looking for an immediate start in a role with a local patch with a rapidly expanding company who have recently secured a number of long term contracts.Do you hold a valid 18th Edition and Testing & Inspection qu ...

Commercial Electrician (18th Edition/Testing & Inspection)Mobile role covering Bristol and surrounding areas£250 per day (Umbrella/Limited Company) Outside IR35Initial 3 year contract with long term extension opportunitiesExcellent opportunity for a Commercial Electrician looking for an immediate start in a role with a local patch with a rapidly expanding company who have recently secured a number of long term contracts.Do you hold a valid 18th Edition and Testing & Inspection qual ...

Commercial Electrician (18th Edition/Testing & Inspection)Mobile role covering Reading and surrounding areas£250 per day (Umbrella/Limited Company) Outside IR35Initial 3 year contract with long term extension opportunitiesExcellent opportunity for a Commercial Electrician looking for an immediate start in a role with a local patch with a rapidly expanding company who have recently secured a number of long term contracts.Do you hold a valid 18th Edition and Testing & Inspection qual ...

Commercial Plumber / Pipefitters needed for North Bristol. £25 per hour, breaks paid. 11 month project. Standard hours are 7:30am to 5pm. 40 week project. 3 floors and a roof: ASHP, 7 x AHU's on the roof, Fan coil units (30 per floor), Rainwater stacks (27), screwed steel up to 2", larger than that is prefabricated, Domestic is all copper press, previous experience of Gebirit fusion weld would be preferred. Gold card or blue card and IPAF needed. The IPAF is Mobile Vertical (3A, 3 ...

CONTRACT MAINTENANCE WELDER / FABRICATOR – DAYSIMMEDIATE START AVAILABLE | HEAVY PLANT ENVIRONMENT | £35/HR | INSIDE IR353-Month Contract | Potential to Become PermanentWagstaff Recruitment are currently seeking an experienced Maintenance Welder / Fabricator to join a busy heavy plant environment. This is an excellent opportunity for a hands-on engineer looking for a practical maintenance role where your skills will have an immediate impact.Pay Rate: £35 per hour for all hours ...

Contract Maintenance Engineer Required – Immediate Start AvailableWe’re looking for an experienced Contract Maintenance Engineer to join a fantastic client on a 2-month contract based in Evesham.This is a great opportunity to work with a supportive team, and get stuck into an immediate start contract.If you’re ready for your next engineering contract, hit that apply button!Key Details:Location: EveshamContract Length: 2 monthsStart Date: ImmediateShift Pattern: Monday to Friday ...

Job Title - Control Panel BuilderDuration - 1 Month ContractWorking Model - Onsite in BurnleyHourly Rate - Circa £30p/hour Control Panel Builder Overview My client is looking for a qualified electrician with experience in control panel building. Candidates should be competent in wiring, assembling, and testing control panels, reading electrical drawings and schematics, and carrying out fault finding where required. A strong f ...

Location: London Contract: 6-Month Contract Hours: Full-time, Onsite Monday to Friday 7am-5pm (Including shifts)Rate: £34.14 per hour - £45.02 OT (via Umbrella) To undertake corrective and preventative maintenance activities associated with train doors, interior flooring systems and other areas of rolling stock, including inspection, repair, modification, refitment, testing and fault finding on Hitachi rolling stock assets. The role provides specialist capability to maintain service ...

Design Engineer – Test FacilitiesPeterborough – fully on site PE1Initially 12 months – very long term extensions are highly likelyMon-Thurs 8.30am-4.45pm / Fri 8.30am-4.15pm£28.35ph PAYE + holiday + pension or £38.50 umbrella rateOur client, a globally recognised Fortune 100 engineering and manufacturing organisation, is seeking a Mechanical Design Engineer to join its advanced Test Facilities Engineering team in Peterborough.This is an exciting opportunity to suppo ...

Are you an experienced engineer with a passion for internal combustion engines and a track record of driving complex mechanical component development? A large global manufacturer based in Peterborough is undergoing a period of significant investment to meet the challenges of an ever-changing energy landscape. This is your chance to join a future-focused, world-class team and make a tangible impact on the next generation of industrial power systems! If you want to put your technical expertise to ...

Job title: EC&I TechnicianJob Type: ContractStart date: ASAP – depending on security clearancePay rate/ Benefits: £30ph UmbrellaLocation: OxfordHours of work: 40 hours per weekRole information:• To work within a team to install, test and commission the vacuum system. This will include working on all electrical aspects of the vacuum instrumentation including racks and field equipment such as controllers, valves, gauges and pumps.• To undertake the testing, fault finding ...

Role: Electrical FitterClient: Körber Supply ChainProject: Amazon Installation – DZM1Location: MiddlesbroughContract Length: 6–8 WeeksStart Date: Early June (DZM1 Middlesbrough)Contract Type: ContractROLE OVERVIEWWe are seeking experienced Electrical Fitters to support a major automation installation project at Amazon DZM1 in Middlesbrough.The successful candidates will be responsible for carrying out electrical installation activities across a large-scale warehouse automation s ...

Our client, a key player in the Defence & Nuclear sectors, is seeking an experienced Electrical Inspector to join their team on a contract basis. This role is vital in ensuring that electrical installations and test activities meet ITP requirements, nuclear safety culture expectations, and applicable codes and standards.Key Responsibilities:Perform inspections in line with Inspection & Test Plans (ITPs) and agreed hold/witness points.Verify installation quality for cable containment/tray ...

Job Title: 2 x Electrical SupervisorsLocation: Central LeedsSalary: £275 - £300 day rateType: ContractProject Duration: 12 months + (Residential Apartment Block)Job Description:We are urgently seeking 2 experienced Electrical Supervisors to join our clients team for an exciting project based in central Leeds. The successful candidate will play a crucial role in overseeing the electrical aspects of a sizeable, new-build residential apartment block project with a duration of 12 months ...

Job title: Electrical Test Technician Job location: Derby, Derbyshire Hourly pay rate: £28.44 Days/£30.75 Morn/£33.05 Afters (Umbrella) Shifts: Days, Mornings and AftersHours per week: 37 hours a week + O/T Duration: 12 Months+ (predicted)Start date: ASAPIndustries considered: RAF, Rail, Rolling Stock, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process Engineering. Client Summary: Our client is ...

Electrician | Industrial Installation |Immediate Start Available – 22nd JuneM&E Giants Recruitment are currently looking for 3 experienced Gold Card Electricians for an exciting industrial installation project at a major Amazon Distribution Centre in Mill Hill.This is a fantastic opportunity to secure consistent work on a large-scale industrial project with good hours and competitive rates.Job Details * Location: Mill Hill * Project: Amazon Distribution Centre * Start Date: 22nd June * ...

Proactive are currently recruiting for an Industrial Electrician in Letchworth to start work immediately. This is an excellent opportunity to join a growing project with further requirements expected in the coming weeks.As an Industrial Electrician, you'll be a key part of the installation team, working on industrial machinery and conveyor systems within a fast-paced engineering environment.Responsibilities: · Wiring and installation of conveyors and industrial machinery · Carr ...