305 jobs found

Location: Cambridge (CB1) Duration: Temporary - up to 6 months Hours: Monday-Friday, 9:00am-5:30pm. Part time hours considered Salary: 13-15ph DoE Job Reference: 36173 Polytec are seeking a reliable and detail-focused Technician to join our central Cambridge based client. The successful candidate will be responsible for the preparation of cable ends and the soldering of fine wires onto very small PCBs. This is a hands-on role requiring precision and steady manual dexterity. You will also comple ...

Vehicle Prepper Grimsby (DN31) 16.05 per hour Temp to Perm after 12 weeks GI Group Humber are recruiting for an experienced Vehicle Prepper on behalf of our client based in the Grimsby DN31 area. Pay & Hours Pay rate: 16.05 per hour 4 on 4 off shift pattern Working hours: 06:00 - 18:00 Temp to perm opportunity after 12 weeks (subject to performance and attendance) Key Responsibilities Duties include, but are not limited to: Bodywork preparation including sanding, priming, masking and filling panels Preparing vehicles for paint or repair to a high standard Identifying and reporting any faults, damage or defects Safely driving and manoeuvring vehicles within the site or designated locations Ensuring all work is carried out in line with health an ...

Position: Coating Inspector Location: Bradford / Leeds - with travel Type: Contract (ongoing with possible Temp om Perm) Rate: 22.00/hr plus holiday pay. Mon-Fri circa 40 hours per week We are recruiting for a Level 2 Graded Coating Inspector to join an engineering team in providing galvinised coating inspection on multiple large scale estates. The role will require travel to each facility and conduct inspections of the required areas and the coating applied to ensure compliance. The position is initially a contact role with van supplied and exp ...

Bandsaw Operative Nights Staveley £14.00 per hour + £22 Night Shift Allowance Monday to Friday 10:00pm to 8:00am Full-Time Ongoing Opportunity We are currently recruiting for an experienced Bandsaw Operative to join a well-established company in Staveley on a permanent night shift. This role is ideal for someone with strong experience operating bandsaw machinery within a warehouse or manufacturing environment, who is reliable, proactive, and looking for long-term stable work. The Role Duties will include: Operating industrial b ...

Do you have experience of working within a chemical environment? Do you have an FLT Counter Balance Licence? We might have your next role. We are recruiting 2 Chemical Process Operatives with FLT Counterbalance licences on behalf of a highly reputable chemical manufacturer based in Wythenshawe. This is an excellent opportunity to join a chemical company with over 100 years of industry expertise PLEASE NOTE: This role is within a chemical manufacturing environment. We are specifically seeking can ...

Hand Packer - will be working stacking and filling pallets Packing, hand stacking, labelling and general production duties Performing quality control checks. Adhering to safety protocols. General housekeeping, ensuring the work environment is tidy. Working Days - 8am - 4pm f you feel that you have what we need then please do call Aileen on (phone number removed) or email your up to date CV to: (url removed) Kinetic plc is a Recruitment Consultancy with over 40 years of experience of delivering s ...

Manufacturing Operator I - Join Our Growing Team! Location: Paisley (Inchinnan Business Park) Position Type: Full-Time, 6-Month Contract Hours: 37.5 hours per week Pay Rate: Base of 13.20/hr + 25% shift allowance Start Date: ASAP About the Role We are seeking a Manufacturing Operator I to become a key part of our growing manufacturing team. In this role, you will provide crucial support to our production processes on-site, ensuring daily manufacturing requirements for cell culture media and reagents are met. Your dedication will directly impact the overall efficiency of our machinery and our ability to hit schedule targets. This is a fantastic entry-level opport ...

Vehicle Technician Upper Heyford (Bicester, Oxfordshire) If you are an experienced Vehicle Technician APPLY NOW - For more information, please contact our team on (phone number removed) or e-mail url removed) ) RATES: £15.00 - £20.75 per hour HG Recruitment are recruiting a 2-3 Vehicle Technicians, in partnership with our client based in Upper Heyford (Bicester, Oxfordshire). This is a temporary ongoing contract. We are seeking experienced Vehicle Technicians to join our clients team on a tempo ...

Labourer / Van Driver Pay: 12.71- 13.01 per hour Hours: Mon-Thu: 06:30-16:00, Fri: 06:30-12:30 Contract: Ongoing temporary (potential to go permanent) Weekly Hours: 42 paid hours A busy manufacturing facility requires a Labourer/Van Driver to support day to day operations across labouring, housekeeping, stock handling, and occasional delivery driving. This is a hands on role ideal for someone reliable, and happy to turn their hand to a variety of tasks. The Labourer / Van Driver Role Join a busy ...

Multiple CNC Miller positions available with a growing Engineering organization based in Wakefield. Offering hourly rates up to 18.00, guaranteed overtime paid at 150%, 30-minute flexibility on start & finish times and the chance to work on bespoke, state-of-the-art projects. Established over 120 years ago, this impressive Engineering organization has diversified and is now a major supplier to a number of high-profile businesses operating in a variety of industries, including Chemical, FMCG and Steel Processing. In the past 2 years, this employ ...

MILLERS & TURERS REQUIRED - Multiple CNC Machinist positions available with a growing Engineering organization based in Wakefield. Offering hourly rates up to 22.50, 4 shifts per week, guaranteed overtime paid at 150%, and the chance to work on bespoke, state-of-the-art projects. Established over 120 years ago, this impressive Engineering organization has diversified and is now a major supplier to a number of high-profile businesses operating in a variety of industries, including Chemical, FMCG and Steel Processing. In the past 2 years, this em ...

Our client is seeking a Bench Assembler. This role is offered as a temp to perm position. The role involves mechanical assembly using hand tools to measure and cut metal pipes packing and general housekeeping of the production area. Location: Rochester Laker Road Hours: 40hrs per week - 8am to 4.30pm, Monday to Friday Rate: £12.71 ph PAYE, weekly pay Please note due to our client s location candidates will need to have their own transport or live within a 20 minute walk of Laker Road, Rochester. As Bench Assembler ...

The Role: We are currently recruiting for a Electrical Maintenance Engineer to work for one of the UK s largest maintenance contractors in Hemel Hempstead. Duties will include: Carrying out scheduled PPM and reactive maintenance tasks in maintaining site assets ensuring equipment availability. Ensure that routine maintenance is carried out to all building plant, equipment and systems to meet and exceed expectations, and agreed service level agreements. Respond to Building Management System alarms, and effect em ...

Multiple Temporary Mechanical Fitter positions available with a growing Engineering organization based in Wakefield. Offering hourly rates up to 18.00, guaranteed overtime paid at 150%, 30-minute flexibility on start & finish times and the chance to work on bespoke, state-of-the-art projects. Established over 120 years ago, this impressive Engineering organization has diversified and is now a major supplier to a number of high-profile businesses operating in a variety of industries, including Chemical, FMCG and Steel Processing. In the past 2 y ...

Jib Electricians required 1 Weeks work including bank holiday higher rate of 31.50 per hour. (Working just the Tues - Fri is an option at the lower rate of 26) 10 hours per day booked Electricians to work on a commercial shop fit, 1st and 2nd fix power and lighting going in on a commercial refurbishment. You must be a fully qualified electrician with a valid gold ECS card and be able to provide electrical references where you have previously carried out similar work has an electrician on fit ou ...

Recruitment Central, resourcing on behalf of our South Yorkshire based client, have an immediate requirement for 1 x Air Con Engineer for a commercial contract in Barnsley. Start: Tuesday 26th may or ASAP Length of contract: 6-8 weeks Hours: Mon - Thurs 7:30am - 4pm - Fri 7:30 - 2pm Duties: Piping up Air Con units - VRV Systems Parking: Free Due to the nature of the contract applicants are required to hold a valid CSCS skills card.

Assembly Production Operative My client is looking for ongoing Assembly staff, with good hand dexterity and attention to detail for immediate start. The ideal candidate would have experience but not essential as full training will be given You would be working on a three week shift pattern:- 06.00-14.00 Monday to Thursday 06.00-12.00 Friday, 14.00-22.00 Monday to Thursday, 12.00-18.00 on Friday 22.00-06.00 Monday to Thursday and 18.00-00.00 on Friday. This is an ongoing position that could lead ...

General Labourer/FLT Driver - Manufacturing Environment 4-Day Week We are currently recruiting for a General Labourer to join a busy and close-knit manufacturing team on an urgent basis. This is a hands-on role supporting the day-to-day running of the shop floor and maintaining high housekeeping standards across the facility. Ideal for someone reliable, hardworking, and comfortable working in a fast-paced industrial environment. The Role As a General Labourer, your duties will include: General shop floor cleaning and housekeeping Replenishing oils and coolant supplies Emptying ...

CNC Setter Operator Redruth Aerospace / Machine Shop 19.46 to 29.38 per hour inclusive of shift allowance Monday to Friday Temp to Perm Introduction Acorn by Synergie is proud to be working in partnership with Pall Redruth, a world-leading manufacturer in the aerospace and industrial engineering sectors. This is an exciting opportunity for a skilled CNC Setter Operator to join a forward-thinking organisation renowned for precision engineering, technical innovation, and manufacturing excellence. ...

An engineering company based in Maldon are looking for a Sheet Metal Fabricator to join their busy company. We are looking for someone who is able to set and operator CNC Brake Presses, use a guillotine and have a good engineering background. The role is paying up to 16ph depending on your skills and experience. The hours are 8am till 4.30pm Monday to Friday with a 30 minute lunch break. This is a temporary to permanent position. Sheet Metal Worker duties:- - Setting and operating a CNC Press B ...

Stores Operative 6 Month Contract (Potential to Extend) Chippenham Monday to Friday, 7:30am 3:30pm We are recruiting on behalf of our client for a Stores Operative to join a busy and fast-paced team in Chippenham on a 6-month contract, with a strong possibility of extension based on performance and business needs. This is a hands-on role ideal for someone with experience in warehouse or stores environments who is confident working with systems and managing stock efficiently. Key Responsibilitie ...

I'm working with a long-standing, high-quality welding and fabrication company based in South Woodham Ferrers - and they're looking for an experienced Welder Fabricator to join their growing team. If you're a MIG Welder, happy with varied work, regular overtime, and going out on site to install projects then this is a great job for you. The Offer: Hourly rate up to 20ph depending on your skills and experience Overtime at 1.33x weekdays/Saturdays, 2.0x on Sundays Monday to Friday, 7:30am - 3:30p ...

A company based near Danbury who are an engineering company are looking for someone to set and operate their CNC Press Brake. The comapany are a small outfit with a tight knit happy team, who work on a variety of different projects. We are looking for someone with experience setting and operating CNC Press Brakes and sheet metal. If you can programme or edit programmes, that is a bonus. The role is paying up to 16ph working 7.30am to 5pm Monday to Thursday and 7.30am to 1pm on Fridays. CNC Pres ...

Role: Electrical Assembler Location: Hatfield Hours: Full time - Temporary Salary: £12.80 per hour 7:30-4:30pm Monday to Friday An excellent opportunity has now arisen for a Electrical Assembler to join our clients successful team. Duties of a Electrical Assembler : Soldering Working with cables Using hand tools Electrical testing What we would like from you: Soldering experience Production experience Basic computer skills If you are interested in this role, please apply below with your most re ...

Job Title: Finisher / Polisher Location: Sheffield Salary: 14.43 - 14.97 + Shift Allowance Hours: Rotating Shifts 6:00am - 2:00pm 2:00pm - 10:00pm Early finish on Fridays (6-hour shift) Overview: We are recruiting for a Finisher / Polisher to join a well-established manufacturing business in Sheffield. This role is ideal for someone with a strong manufacturing background who takes pride in producing high-quality finishes and working to precise standards. Key Responsibilities: Finishing and polishing metal components to a high s ...

Temp Static Fabric Technician/Caretaker I am currently recruiting for my client is Brighton for a fabric technician/Caretaker for a University Halls of Residence. You will have a proven background in maintenance and be able to pass an enhanced DBS check. Sector: Education Duties will include ppm's such as temp tap test's, tmv temp test, checks on shower heads, walk rounds, as well as fixing cupboard doors, blockages, changing toilet furniture, small painting projects and general day to day main ...

Machine Wirer Leicester, LE19 Days Shifts - Early Finish Friday Temporary role £22p/h Umbrella or CIS Are you an experienced Machine Wirer seeking an exciting opportunity in a growing industry? If yes, read on I'm excited to share an opportunity with a forward-thinking engineering company that's on the lookout for an experienced Machine Wiring Technician. This is an ideal role for someone who thrives in high-precision environments and has a proven track record in Machine Wiring. The Role - Electrical Fitter: Electrical wiring of new build machines Wide range of ...

Electricians Required Deeside We are currently looking for experienced Electricians for a project in Deeside. 26.00 per hour 3 weeks' work initially, potentially longer Candidates must have experience in: Cable glanding and termination to electrical boards General electrical installation works including: Installing cable trays Unistrut installations Pulling cables Working on construction sites Requirements: Valid JIB / ECS Card essential Important Information: We endeavour to process your person ...

Job Title: Civil Project Engineer (Tier 1 Infrastructure) - UK Visa Holders Location: London, United Kingdom Job Type: Contract (6-24 months) Day Rate: 350 - 550 per day (dependent on experience) Summary An exceptional opportunity for experienced Civil Engineers with existing or pending UK work visas (including Tier 5 Youth Mobility or Ancestry visas). Especially suitable for engineers from New Zealand or Australia. Relocate to London and immediately contribute to some of the world's most significant Tier 1 Major infrastructure projects. We connect talented engineers with leading main contractors on long-term contracts, offering excellent day rates and a seamless transition int ...

Cable Assembler Swindon £12.71 per hour We are looking for a skilled and detail-oriented Cable Assembler to join our client in Swindon. This is an excellent opportunity for someone with hands-on assembly experience who takes pride in producing high-quality work and enjoys working as part of a collaborative team. Cable Assembler Roles and Responsibilities: Assemble cable units in line with customer specifications and internal build standards Read and interpret technical drawings and build instructions Carry out soldering and c ...